5 Must-Have Features in a Animal Drinker for sale

25 Apr.,2024

 

For more information, please visit SHANGLISHI.

If you want to learn more, please visit our website SHANGLISHI.

If your cat laps at a faucet, or your dog treats the toilet bowl like it’s a bar, your furry friend might want a water fountain to call their own. Fresh, clean water is critical to the health and happiness of our pets, and a gentle flowing stream may make your pet more excited to drink.

This fountain pings your phone with detailed information on your pet’s drinking habits. But it’s expensive, and the filter replacements add up.

This slightly louder-than-average fountain disassembles easily, and it offers decent quality for the price and varying flow options. It also has a dishwasher-safe steel dish.

This fountain’s faucet-like curved metal spout disassembles easily for cleaning, and it works quietly. This model is one of several apparent clones of its design, and its dark interior can make grime hard to spot.

This large, stainless steel bubbler fountain minimizes plastic, and most of its parts are dishwasher-safe. We’ve seen reports of pump failures, but we haven’t experienced them in testing.

This fountain is nearly silent and easy to clean, and it has thoughtful design features. But to power it, you might need to grab an old phone adapter.

Fountain pumps are notorious for failing, even in the highest-quality fountains. So we favored models that come with at least a one-year warranty.

If a fountain has a loud motor or makes odd noises, it can scare pets and annoy humans. We opted for quieter water fountains that shouldn’t disturb anyone.

Keeping a fountain clean is a top priority. So we picked models with fewer small parts and those that are easy to assemble and disassemble.

With only five main parts, the Petkit EverSweet Solo 2 was the easiest fountain to take apart and clean. Its wireless pump is nearly silent, and it has a convenient auto-shut-off feature, so it doesn’t burn out when the water level gets too low. The app can set up reminders for cleaning and refilling. But we’ve had mixed experiences with customer service. And, oddly, the device doesn’t include the type of 5v 1A adapter you’d need to charge it in a standard outlet.

Advertisement

SKIP ADVERTISEMENT

If your pets drink a lot, the Pioneer Pet Big Max Stainless Steel Drinking Fountain is a large-capacity model that can accommodate big dog slurps and multiple drinkers at one time. The Big Max’s tank and tower are stainless steel, so this one is simple to take apart and throw in the dishwasher. The wide, uncovered bowl is easy to top off between cleanings, and this fountain has one of the longest power cords of all the fountains we tested. Its negative reviews center on anecdotal reports of pump failures, but this is pretty common for the category.

The Giotohun Cat Water Fountain’s shining feature is its faucet spout—it looks close enough to the ones in sinks that it may intrigue a tap-loving pet. The Giotohun fountain is easy to take apart for cleaning, and it’s one of the quietest wired fountains we tested. Also, it has an LED-lit translucent bowl, so you can keep tabs on the water level. This fountain pretty clearly seems to be a clone of several identical models with other brand names, though we haven’t been able to confirm that. And due to this model’s dark interior basin, it’s harder to notice grime buildup than it is with lighter-colored fountains.

Eerily similar to our former pick, the Catit fountain, the Wonder Creature Cat Water Fountain is slightly quieter, cheaper, and smaller in comparison. It’s not as loud as other fountains in its price range, but it’s not as quiet as our other picks. The plastic tank and dishwasher-safe stainless steel upper dish are of decent quality for the price, and a helpful LED shows when the tank is running low. The main parts easily screw apart for cleaning, and the upper reservoir accommodates sensitive whiskers, with a versatile trio of flow patterns.

The Petlibro Dockstream App Monitoring Water Fountain monitors how much water your pet is drinking, and it can send you that info (and more) via an app. This model looks nice, and it’s easy to move around. The stainless steel dish is simple to clean, and its spout can be removed to switch from waterfall to bubbler. But this model is pricey, and with the cost of filters (which you’re supposed to replace every few weeks), it’s one of the most expensive fountains we tested.

Slaughtering equipment, particularly for smaller-scale operations, need not be elaborate and expensive. The amount of equipment will depend on the slaughtering procedures employed. If possible, all equipment should be made of stainless steel or plastic, be rust resistant and easily cleaned and sanitized. Equipment which does not get in contact with the meat (e.g. overhead rails, working platforms, knocking pen) is usually made of galvanized steel.

Basic equipment needed for the slaughtering operation:

  • stunning gun, electrical head tongs or simple stunning equipment for direct blow
  • knives:
    sticking - 15 cm sharpened on both sides
    skinning - 15 cm curved
  • a sharpening steel
  • oil or water sharpening stone
  • scabbard and belt for holding knives
  • meat saw - hand or electric and cleaver
  • block and tackle or chain hoist strong enough to hold the weight of the animal to be slaughtered
  • pritch, chocks or skinning rack (dressing cradle)
  • a strong beam, tripod or track 2.4 to 3.4 m from floor
  • spreader - gambrel or metal pipe
  • several buckets
  • working platforms
  • scalding barrel or tank
  • pot, barrel or system for boiling water
  • bell scrapers
  • solid scraping table or platform
  • thermometer registering up to 70°C
  • hog or hay hook
  • torch or flame for singeing

The last seven items indicate additional equipment required when hogs are scalded and scraped rather than skinned.

Useful additional equipment:

  • knocking pen
  • bleeding hooks (for vertical bleeding)
  • blood-catching trough
  • wash trough (tripe) Sanitation of hands and tools:
  • hand wash-basin
  • implement sterilizers

Means should be available to clean thoroughly all equipment coming into contact with carcasses or meat. Implement sterilizers are stainless-steel boxes holding hot (82°C) water, shaped to suit particular equipmentknives, cleavers, saws, etc. (Fig. 2). Knife sterilizers should be placed in positions where every operator who uses a knife has immediate access. Handles as well as blades must be sterilized. Each operator should have at least two knives etc., one to use while the other sterilizes (Figs 10 and 11).

Failure to sterilize all knives and equipment regularly will result in carcass contamination. Bacteria will be transferred from the hide to the carcass and from carcass to carcass (Fig. 12).

Stress in its many forms, e.g. deprivation of water or food, rough handling, exhaustion due to transporting over long distances, mixing of animals reared separately resulting in fighting, is unacceptable from an animal welfare viewpoint and should also be avoided because of its deleterious effects on meat quality. The most serious consequence of stress is death which is not uncommon among pigs transported in poorly ventilated, overcrowded trucks in hot weather. From loading on the farm to the stunning pen animals must be treated kindly, and the lorries, lairages and equipment for livestock handling must be designed to facilitate humane treatment. Stress immediately prior to slaughter, such as fighting or rough handling in the lairage, causes stored glycogen (sugar) to be released into the bloodstream. After slaughter this is broken down in the muscles producing lactic acid. This high level of acidity causes a partial breakdown of the muscle structure causing the meat to be pale, soft and exudative (PSE). This condition is mostly found in pigs.

10. Plastic (right) handles are more hygienic than wooden (left) for knives and other equipment. Note the excessively worn knife (third from left) which should be discarded12. Poor hygiene during carcass dressing causes the spread of bacteria from the skin of the carcass to knives and to operators' hands
11. Knives and other equipment should be kept sharp and in good repair

Long-term stress before slaughter such as a prolonged period of fighting during transport and/or lairage leads to exhaustion. The sugars are used up so that less is available to be broken down and less lactic acid is produced.

The reduced acidity leads to an abnormal muscle condition known as dark, firm and dry (DFD) in pigs or dark cutting in beef. The condition is rarer in lamb. Such meat has a high pH (above 6.0) and spoils very quickly as the low acidity favours rapid bacterial growth.

Handling animals during transport and lairage

An electric goad (Fig. 13) should be used rather than a stick or tail-twisting not only to avoid stress but also to prevent carcass bruising. Grabbing sheep by the fleece also causes bruising (Fig. 14).

To avoid fighting, animals not reared together must not be mixed during transport and lairage. Load and unload using shallow stepped ramps to avoid stumbles. Trucks should be neither over- nor underloaded. Overloading causes stress and bruising due to crushing. Underloading results in animals being thrown around and falling more than necessary. Drivers should not corner at excessive speed and must accelerate and decelerate gently.

The lairage should have small pens. Corridors must curve and not bend sharply so that stock can see a way forward. Stock must not be slaughtered in sight of other stock. Plenty of clean water must be available. The lairage must be well lit and ventilated. Do not hold stock in lairage for more than a day. Only fit, healthy stock may be slaughtered for human consumption.

Fasting before slaughter reduces the volume of gut contents and hence bacteria and therefore reduces the risk of contamination of the carcass during dressing. It is usually sufficient for the animals to receive their last feed on the day before slaughter. Stock should have a rest period after arrival at the slaughterhouse. However, long periods in the lairage can lead to DFD if the animals are restless and fighting or mounting.

Animals should be as clean as possible at slaughter. Producers should wash their animals before leaving the farm. Trucks used for transport must be washed after each load and the lairage at the slaughterhouse should be kept clear of faecal matter and frequently washed (Figs 15 and 16).

Stunning prior to bleeding

Most countries have legislation requiring that animals are rendered unconscious (stunned) by a humane method prior to bleeding. Exceptions are made for religions which require that ritual slaughter without prior stunning is practised, provided the slaughter method is humane. Stunning also makes sticking (throat-slitting) less hazardous for the operator. The animal must be unconscious long enough for sticking to be carried out, and for brain death to result from the lack of blood supply.

13. An electric goad delivers a small electric current via two electrodes to encourage animals to move. It avoids stress and carcass damage

15. Trucks must be thoroughly washed after each load
14. Unsightly bruising caused by striking the animal with a stick. This not only causes loss of product but is also inhumane 16. Pens will need washing after emptying

Methods of stunning

Direct blow to skull using a club or poleaxe. The blow must be dealt with precision and force, so that the skull is immediately smashed, causing instantaneous unconsciousness. In cattle the aiming point is in the middle of the forehead in line with the ears, where the skull is thinnest. Horses have thinner skulls and are therefore easier to stun by this method. In sheep and goats the brain is more easily reached from the back of the neck. Pigs have a well-developed frontal cavity so the blow should be aimed slightly above the eyes.

Slaughtering mask. A bolt held in the correct position by the mask is driven into the animal's brain by a hammer blow. The device is usually fitted with a spring which returns the bolt to its original position.

Free bullet fired from a pistol into the skull is effective but unsafe. This method has been used on horses and cattle.

Captive-bolt pistols fitted with a blank cartridge are effective on cattle and sheep but not pigs whose skulls are thicker (Figs 17 and 18). After firing, the bolt returns to its original position in the pistol. The bolt may or may not be designed to penetrate the skull. With penetrating types the brain becomes contaminated with hair, dirt and bone fragments. If brains are to be saved as edible tissue then the non-penetrating type with a mushroom-shaped head should be used.

Electrical stunning. An electric current of high frequency but, in the case of manually operated equipment, of relatively low voltage (60–80 V) is passed through the brain of an animal for a few seconds to produce unconsciousness. If applied correctly a deep state of unconsciusness is invariably achieved. Strict safety rules must be observed. Head tongs (Fig. 19) are suitable for pigs and sheep but not for cattle. The electrodes carried on the ends of the tongs must be accurately placed (Figs 20 and 21). Places where the skull is thick must be avoided. Electrical contact is impeded by hair and caked mud. Water or brine will improve contact but the head must not be completely wet otherwise the current will have a short-circuit path avoiding the brain. The electrodes must be applied with strong pressure.

19. Head tongs are used to stun pigs and sheep electrically but are not suitable for cattle. The electrode on the end of each tong is ridged for better contact 17. Captive-bolt stunner suitable for cattle20. The electrodes must be applied firmly to either side of the head so that the electrical current passes through the brain causing unconsciousness in a few seconds 21. Head tongs are also suitable for stunning pigs 18. Aiming point for stunning cattle 

Carbon dioxide stunning is used only in large pig abattoirs. Pigs are induced into a chamber and exposed to a concentration of 85 percent CO2 for about 45 seconds. Although effective for anaesthetizing sheep, it is impractical because of large amounts of CO2 collecting in the wool and affecting operators on the killing line.

Bleeding after stunning

The objectives of bleeding are to kill the animal with minimal damage to the carcass and to remove quickly as much blood as possible as blood is an ideal medium for the growth of bacteria.

Sticking, severing the major arteries of the neck, should immediately follow stunning. Care must be taken not to puncture the chest cavity or it will fill with blood.

22. Immediately following stunning the animal is hoisted by one leg and stuck. For sheep the sticking point is in the side of the neck, the gash cut severing all the major blood vessels in a single movement23. The sticking point for pigs is in the centre of the neck just in front of the breastbone

Cattle. Insert the sticking knife carefully just above the breastbone at 45° pointed toward the head. Ensure that the carotid arteries and jugular veins are severed in one movement.

Sheep. Draw the knife across the jugular furrow close to the head severing both carotid arteries. Alternatively, the knife may be inserted through the side of the neck, though this requires more skill (Fig. 22).

Pigs. As for cattle but do not go in too far or a pocket of blood will collect at the shoulder (Fig.23). To reduce contamination by the scalding tank water the cut should be as small as possible.

Bleeding on a rail

The most hygienic system of bleeding and dressing is to shackle the animal immediately after stunning, then hoist it on to a moving rail. The animal is stuck while being hoisted to minimize the delay after stunning. Bleeding continues until the blood flow is negligible when carcass dressing should begin without further delay (Fig. 24)

Blood for human use must be collected with special equipment to avoid contamination from the wound, the gullet of the knife. A hollow knife directs blood away from the wound into a covered stainless-steel container without touching the skin or hide. The knife may be connected to a hose to reduce the risk of contamination. The hose may even be connected to a pump to speed the blood flow. Between 40 and 60 percent of the total blood volume will be removed though this will be reduced if sticking is delayed. To prevent coagulation, citric acid solution made up with one part citric acid to two parts water is added at a rate up to 0.2 percent of the blood volume. The main sources of contamination during sticking and bleeding include the knife, the wound and the food-pipe. The knief should be changed after each operation and returned to a sterilizer. Cutting the hide of sheep and cattle and opening out to make a clean entry for the sticking knife reduces contamination from the wound. If the food-pipe is pierced semi-digested food may be regurgitated contaminating the blood and neck wound.

Horizontal bleeding

Horizontal bleeding is claimed to give faster bleeding rates and a greater recovery of blood. This may be due to certain organs and blood vessels being put under pressure when animals are hoisted, thus trapping blood and restricting the flow. Bleeding on the floor is very unhygienic. The operation should take place on a specially designed, easily cleaned stainless-steel table which should be cleaned frequently. If blood is to be saved it must not come in contact with the table before reaching the collecting vessel.

24. After sticking, the animal should be left to bleed until the blood flow becomes negligible25. Scalding/dehairing tank which accommodates four pigs: one awaiting immersion, two immersed and one just completing immersion. When the bars are rotated the pigs change position 26. After immersion any remaining loose hairs are scraped from the skin 27. Simple tank for combined scalding/ dehairing. The tank is filled with water at 60°C, a pig is lowered in, the lid is closed and the paddles rotate, the rubber tips loosening the hairs

Bleeding without stunning

The Jewish and Muslim religions forbid the consumption of meat which was killed by any method other than bleeding. Since it is difficult to guarantee that all animals will recover consciousness after being stunned by any particular method, stunning is not generally allowed. There are exceptions, however. Some communities do accept low-voltage electrical stunning.

Because animals are fully conscious at the time of sticking, ritual slaughter may be less humane than sticking after stunning. To reduce the suffering operators must be highly skilled so that a successful gash cut severing all the veins and arteries is made quickly at the first attempt. Different communities have different regulations as to the orientation of the animal at sticking, some favouring a position lying on its side, others insisting it lie on its back. The animal should not be hoisted until unconsciousness due to lack of blood supply to the brain is complete.

Scalding in water at around 60°C for about six minutes loosens the hair in the follicle. Too low a temperature and the hair will not be loosened and too high a temperature and the skin will be cooked and the hair difficult to remove. The simplest equipment consists of a tank into which the pig is lowered by a hoist. The water is heated by oil, gas, electricity or an open steam-pipe.

To check the effectiveness of the scald, rub the skin with the thumb to see if hair comes away easily. Some machines have the thermostatic controls and timers. To reduce contamination, scalding water should be changed frequently, pigs should be as clean as possible at sticking, and bleeding should be fully completed before immersion.

In large factories pigs are transported through scalding tanks with rotating bars (Fig. 25) or through long scalding tanks stretching from the sticking point to the dehairing point in the time required for an effective scald.

Dehairing is done with a specially formed scraper (bell scraper or knife). If the scald is effective all the hair can be removed by this manual method (Fig. 26). Another simple method is to dip the pig in a bath containing a hot resin adhesive. The pig is removed from the bath and the resin allowed to set partially when it is peeled off pulling the hair with it from the root. This is less labour-intensive than scraping and produces a very clean skin. After use the adhesive is melted again, strained to remove the hair and returned to the tank.

Another method of removing dirt and hair in one operation is to skin the carcass though this is only done when the skin is required for leather goods.

With the simple scalding tank, dehairing and scalding may be combined in one operation. Inside the tank are rotating rubber-tipped paddles which are started after closing the lid. As the hair is loosened by the scalding water it is removed by the rubbing effect of the paddles against the skin (Fig. 27).

Singeing removes any remaining hairs, shrinks and sets the skin, decreases the number of adhering micro-organisms and leaves an attractive clean appearance. It may be done with a hand-held gas torch (Fig. 28). Automated systems transport the pig into a furnace and leave it long enough for an effective singe.

After singeing, black deposits and singed hairs are scraped off (Fig. 29) and the carcass is thoroughly cleaned before evisceration begins.

Cattle

The outer side of the hide must never touch the skinned surface of the carcass. Operators must not touch the skinned surface with the hand that was in contact with the skin.

Combined horizontal/vertical methods

Head. After bleeding, while the animal is still hanging from the shackling chain, the horns are removed and the head is skinned. The head is detached by cutting through the neck muscles and the occipital joint. Hang the head on a hook (Fig. 30). Lower the carcass on its back into the dressing cradle.

Legs. Skin and remove the legs at the carpal (foreleg) and tarsal (hind leg) joints. The forelegs should not be skinned or removed before the carcass is lowered on to the dressing cradle or the cut surfaces will be contaminated. The hooves may be left attached to the hide.

28. After scraping away loose hairs any remaining hairs can be singed and the skin set with a hand-held gas torch30. The head is completely skinned and hung on a hook to await inspection 29. A special knife, the black scrape, is used to scrape off any singed hairs and black deposits
32. In the combined horizontal/ vertical dressing method the carcass is lowered on to a cradle, the legs, brisket and flanks are skinned, then the carcass is raised to the half-hoist position. Note that this is much less hygienic than verticaldressing on a rail 33. Note the possible contamination of the carcass by the intestines and the hide dragging on the floor in the combined horizontal/vertical dressing method 31. Correct cutting lines for hide removal 

Flaying. Cut the skin along the middle line from the sticking wound to the tail. Using long firm strokes and keeping the knife up to prevent knife cuts on the carcass, skin the brisket and flanks, working backwards toward the round (Fig. 31). Skin udders without puncturing the glandular tissue and remove, leaving the supermammary glands intact and attached to the carcass. At this point raise the carcass to the half-hoist position, the shoulders resting on the cradle and the rump at a good working height (Figs 32 and 33).

Clear the skin carefully from around the vent (anus) avoiding puncturing it and cut the abdominal wall carefully around the rectum. Tie off with twine to seal it. Skin the tail avoiding contamination of the skinned surface with the hide. Raise the carcass free of the floor and finish flaying.

Vertical methods

High-throughput plants have overhead rails which convey the carcass from the sticking point to the chills. Hide removal is carried out on the hanging carcass (Figs 34, 35 and 36). The operations are as in the combined horizontal/vertical method, but as it is not possible to reach the hide from ground level more than one operator is needed. A single operator may work with a hydraulic platform which is raised and lowered as required.

Automatic hide pullers are used in high-throughput slaughterhouses. Some types pull the hide down from the hind, others from the shoulders upwards toward the rump.

Automation of hide removal reduces contamination since there is less handling of the carcass and less use of knives. Moving overhead rails also improve hygiene by reducing carcass contact with operators, equipment such as dressing cradles and with each other since carcasses are evenly spaced.

Small ruminants

Sheep fleeces can carry large volumes of dirt and faeces into the slaughterhouse. It is impossible to avoid contamination of sheep and lamb carcasses when the fleece is heavily soiled. The fleece or hair must never touch the skinned surface, neither must the operator touch the skinned surface with the hand that was in contact with the fleece.

34. The leg is freed from the skin and the hock cut off 35. Pneumatically operated rotating knives (flayers) speed the removal of the hide from the flanks36. Flaying knives are used for the more intricate parts of hide removal

Combined horizontal/vertical method

The animal is turned on its back and cuts are made from the knuckles down the forelegs. The neck, cheeks and shoulders are skinned. The throat is opened up and the gullet (food-pipe) is tied off (see Fig. 41). The skin on the hind legs is cut from the knuckles down to the tail root. The legs are skinned and the sheep is hoisted by a gambrel inserted into the Achilles tendons. A rip is made down the midline and skinning proceeds over the flanks using special knives or the fists (see Fig. 39). The pelt is then pulled down over the backbone to the head. If the head is for human consumption it must be skinned or it will be contaminated with blood, dirt and hairs.

Moving cratch and rail system. The hanging carcass is lowered on to a horizontal conveyor made up of a series of horizontal steel plates, bowed slightly and divided into sets large enough to cradle a single animal. Two operators usually work together on each lamb performing the legging operations and opening the skin to the stage where it can be pulled off the back. When the gambrel is inserted into the hind legs it is hoisted on to a dressing rail.

Vertical method

At sticking the animal is shackled by one hind-leg and left to bleed. Dressing commences with the free leg which is skinned and the foot removed (Fig. 37). A gambrel is inserted into this leg and hung on a runner on a dressing rail. The second leg is freed from the shackle, skinned and dressed, then hooked on to the other end of the gambrel. The skin is opened down the midline and cleared from the rump.

A spreader frame (a bar U-shaped at each end) spreads the front legs to simplify work on the neck, breast and flanks. The front toes are held in each end of the frame which is then slung up on to a separate travelling hook. The animal is therefore suspended by all four legs belly uppermost (Figs 38 and 39). Skinning continues as in the combined horizontal/vertical method. To clear the shoulders and flanks, the forelegs are freed from the spreader and the feet removed, the animal returning to a vertical position. The skin can now be completely pulled off (Fig. 40), including the head if this is for consumption, though this takes some work with the knife. In both methods, after fleece removal the vent and food-pipe are cleaned and tied off (Fig.41).

37. Fleece removal starts with skinning the free hind leg. Care must be taken to avoid the hide touching the skinned surface or the carcass will be contaminated with faecal matter 38. With forelegs in a spreader frame and hind legs in a gambrel, the sheep is suspended in a horizontal position40. After skinning the neck and breast, the front legs are freed and skinning continues in the vertical position with the flanks and back 39. The fists can be used to clear the fleece from the breast 41. After skinning the neck, the food-pipe is freed and tied off to prevent regurgitation of stomach contents

With all species care must be taken in all operations not to puncture the viscera (Fig. 42). All viscera must be identified with the carcass until the veterinary inspection has been passed. After inspection the viscera should be chilled on racks etc. for better air circulation (Fig. 43).

Cattle

The brisket is sawn down the middle (Fig. 44). In the combined horizontal/ vertical system this is done with the animal resting on the cradle. The carcass is then raised to the half-hoist position and when hide removal is complete the abdominal cavity is cut carefully along the middle line. The carcass is then fully hoisted to hang clear of the floor so that the viscera fall out under their own weight (Fig. 45). They are separated into thoracic viscera, paunch and intestines for inspection and cleaning (Figs 46 and 47). If any of the stomachs or intestines are to be saved for human consumption, ties are made at the oesophagus/stomach, stomach/duodenum boundaries, the oesophagus and rectum having been tied off during hide removal. This prevents cross-contamination between the paunch and the intestines.

Small ruminants

A small cut is made in the abdominal cavity wall just above the brisket, and the fingers of the other hand are inserted to lift the body wall away from the viscera as the cut is continued to within about 5 cm of the cod fat or udder.

The omentum is withdrawn, the rectum (tied off) loosened, and the viscera freed and taken out. The food-pipe (tied off) is pulled up through the diaphragm. The breastbone is split down the middle taking care not to puncture the thoracic organs which are then removed.

Pigs

Loosen and tie off the rectum. Cut along the middle line through the skin and body wall from the crotch to the neck (Fig. 48). Cut through the pelvis and remove the bladder and sexual organs. In males the foreskin must not be punctured as the contents are a serious source of contamination. All these organs are considered inedible.

42. When cutting through the abdomen wall, if the viscera are punctured their contents will severely contaminate the carcass43. A portable rack suitable for hanging offal for chilling 44. A mechanical saw speeds the splitting of the brisket but care must be taken not to puncture the viscera 45. After carefully cutting the abdominal wall along the midline the viscera fall out under their own weight46. A suitable receptacle should catch the viscera so that they are not contaminated by contact with the floor 47. A portable cart suitable for catching cattle stomachs and intestines with a separate tray for edible offal such as liver, heart and lungs

Remove the abdominal and thoracic viscera intact. Avoid contact with the floor or standing platform.

The kidneys are usually removed after the carcass has been split down the backbone. The head is usually left on until after chilling.

Hygienic carcass splitting with simple equipment

Cattle

Work facing the back of the carcass. Split the carcass down the backbone (chine) with a saw or cleaver from the pelvis to the neck (Figs 49 and 50). Sawing gives a better result but bone dust must be removed (Fig. 51). If a cleaver is used, it may be necessary to saw through the rump and loin in older animals.

The saw and cleaver should be sterilized in hot (82°C) water between carcasses. Power saws increase productivity.

48. The body wall is split down the midline taking care not to puncture the viscera 49. Mechanical saw for splitting the backbone (chine) of beef carcasses51. Carcasses should be spray-washed to remove visible staining, paying particular attention to bone dust and the internal surface, but without using excessive amounts of water 50. Hand-saws are much slower than mechanical saws though they are preferable to cleavers which splinter bones

Pigs

These are suspended and are split down the backbone as for cattle, but the head is generally left intact (Fig. 94).

Sheep

Sheep and lamb carcasses are generally sold entire. If necessary they can be split by saw or cleaver, but a saw will probably be necessary for older animals.

Carcass washing

The primary object of carcass washing is to remove visible soiling and blood stains and to improve appearance after chilling (Fig. 51). Washing is no substitute for good hygienic practices during slaughter and dressing since it is likely to spread bacteria rather than reduce total numbers. Stains of gut contents must be cut off. Wiping cloths must not be used.

Carcass spraying will remove visible dirt and blood stains. Water must be clean. Soiled carcasses should be sprayed immediately after dressing before the soiling material dries, thus minimizing the time for bacterial growth. Under factory conditions bacteria will double in number every 20 or 30 minutes.

In addition to removing stains from the skinned surface, particular attention should be paid to the internal surface, the sticking wound and the pelvic region.

A wet surface favours bacterial growth so only the minimum amount of water should be used and chilling should start immediately. If the cooler is well designed and operating efficiently the carcass surface will quickly dry out, inhibiting bacterial growth.

Bubbling of the subcutaneous fat is caused by spraying with water at excessively high pressure, which may be due to the pressure in the system or a result of holding the spray nozzle too close to the carcass.

Carcass dressing

The object of carcass dressing is to remove all damaged or contaminated parts and to standardize the presentation of carcasses prior to weighing. Specifications will differ in detail for different authorities. Veterinary inspection of carcasses and offal can only be carried out by qualified personnel. Where signs of disease or damage are found the entire carcass and offal may be condemned and must not enter the food chain, but more often the veterinarian will require that certain parts, for instance those where abscesses are present, be removed and destroyed. Factory personnel must not remove any diseased parts until they have been seen by the inspector otherwise they may mask a general condition which should result in the whole carcass being condemned. Any instructions from the inspector to remove and destroy certain parts must be obeyed.

Refrigeration of carcasses

Carcasses should go into the cooler as soon as possible and should be as dry as possible. The object of refrigeration is to retard bacterial growth and extend the shelf-life. Chilling meat post-mortem from 40°C down to 0°C and keeping it cold will give a shelf-life of up to three weeks, provided high standards of hygiene were observed during slaughter and dressing.

Carcasses must be placed in the cooler immediately after weighing. They must hang on rails and never touch the floor (Fig. 52). After several hours the outside of a carcass will feel cool to the touch, but the important temperature is that deep inside the carcass. This must be measured with a probe thermometer (not glass), and used as a guide to the efficiency of the cooling.

52. Sheep carcasses in the chill-room, hung on rails clear of the floor and spaced to allow air circulation to speed drying

The rate of cooling at the deepest point will vary according to many factors including the efficiency of the cooler, the load, carcass size and fatness. As a general guide a deep muscle temperature of 6–7° C should be achieved in 28 to 36 hours for beef, 12 to 16 hours for pigs and 24 to 30 hours for sheep carcasses. Failure to bring down the internal temperature quickly will result in rapid multiplication of bacteria deep in the meat resulting in off-odours and bone-taint.

High air speeds are needed for rapid cooling but these will lead to increased weight losses due to evaporation unless the relative humidity (RH) is also high. However, if the air is near to saturation point (100 percent RH) then condensation will occur on the carcass surface, favouring mould and bacteria growth. A compromise between the two problems seems to be an RH of about 90 percent with an air speed of about 0.5 m/second. Condensation will also occur if warm carcasses are put in a cooler partially filled with cold carcasses.

The cooler should not be overloaded beyond the maximum load specified by the manufacturers and spaces should be left between carcasses for the cold air to circulate. Otherwise cooling will be inefficient and the carcass surface will remain wet, favouring rapid bacterial growth forming slime (see below).

Once filled, a cooler should be closed and the door opened as little as possible to avoid sudden rises in temperature. When emptied, it should be thoroughly washed before refilling. Personnel handling carcasses during loading and unloading operations should follow the strictest rules regarding their personal hygiene and clothing and should handle carcasses as little as possible.

Marketing of meat under refrigeration

Chilled meat must be kept cold until it is sold or cooked. If the cold chain is broken, condensation forms and microbes grow rapidly. The same rules about not overloading, leaving space for air circulation, opening doors as little as possible and observing the highest hygiene standards when handling the meat apply. An ideal storage temperature for fresh meat is just above its freezing point, which is about - 1°C (- 3°C for bacon because of the presence of salt). The expected storage life given by the International Institute of Refrigeration of various types of meat held at these temperatures is as follows:

Type of meatExpected storage life at - 1°C Beefup to 3 weeks (4–5 with strict hygiene) Veal1–3 weeks Lamb10–15 days Pork1–2 weeks Edible offal7 days Rabbit5 days Bacon4 weeks (at - 3°C)

Under commercial conditions, meat temperatures are rarely kept at - 1°C to 0°C, so actual storage times are less than expected. The times would also be reduced if RH were greater than 90 percent.

Meat should be placed in the refrigerator immediately following receipt. Any parts which show signs of mould growth or bacterial slime should be trimmed off and destroyed. Hands must be thoroughly washed after handling such trimmings and knives must be sterilized in boiling water. The refrigerator should be thoroughly cleaned after finding such meat and should also be cleaned on a regular basis.

Carcasses, quarters and large primals should not be cut into smaller portions before it is necessary as this will expose a greater surface area for bacteria to grow. Freshly cut surfaces are moist and provide a better medium for bacterial growth than the desiccated outer surfaces of cuts that have been stored for some time.

An accurate thermometer should be placed in the refrigerator and checked regularly. The temperature should remain within a narrow range (0° to + 1°C).

Transport of meat

Vehicles for transporting meat and carcasses should be considered as an extension of the refrigerated storage. The object must be to maintain the meat temperature at or near 0°C. Meat should be chilled to 0°C before loading. Meat should hang on rails, not on the floor. If stockinettes are put on carcasses they must be clean. Meat trucks should not carry anything other than meat.

The refrigeration is usually produced by injecting liquid nitrogen or carbon dioxide (CO2) into the compartment or by blowing air over CO2 chunks (dry ice). The temperature in these vans can be set and controlled to minimize the temperature rise and to avoid condensation on the meat surface (Fig. 53).

Insulated vans without refrigeration may be refrigerated by adding dry ice. While this is a reasonably good alternative to the refrigerated truck it does not allow the temperature to be controlled.

Uninsulated vans and open trucks should not be considered as suitable transport for meat, particularly in hot climates. In addition to the temperature abuse, condensation will occur when the meat goes back into refrigeration, and in open trucks the meat is exposed to attack from insects. Loading and unloading should be done quickly. If there are any unavoidable delays then dry-ice blocks should be placed in the partly filled van.

53. Insulated vans with refrigeration units should be used for transporting meat

Carcass and meat handling and marketing without refrigeration

Where refrigeration is unavailable either owing to financial or technical reasons (e.g. no power supply), the shelf-life of meat is reduced to days or hours, not weeks. Slaughter and dressing must be near the point of sale and it must be quick and clean. If carcasses and meat are kept in well-insulated rooms, the temperature can be reduced with dry-ice blocks, if these are available. Since it is easier to chill boneless cuts rather than whole carcasses, hot-boning should be considered.

Stock must be handled carefully to avoid producing high-pH meat which will spoil more quickly. Rooms used for slaughter and handling meat must be clean and well ventilated, but out of direct sunlight, dust-free and verminfree (rodents and insects). Hot water (82°C) must be available to clean all equipment and surfaces and personnel must work very hygienically. Receive all blood into sealed containers and have separate skips on wheels for hooves, skins, green offal and trimmings.

54. Processing and packing of offal must be done in a room separated from the slaughter hall or other meat-handling facilities

Dressing on a vertical hoist will minimize contamination by floor or cradle contact. Let nothing drop on the floor, only into skips. Personal hygiene must be scrupulous. Any spills of gut contents on to the meat should be cut off, but careful work will avoid this. The dressed carcass should be hung on rails. If beef is quartered to facilitate handling, the cut surface is at risk.

Red offal should be hung on hooks. Any offal processing must be in rooms away from meat-handling facilities (Fig. 54). Intestines for human consumption must be thoroughly cleaned and washed.

Storage and transport without refrigeration

Meat should be put on sale within a day of slaughter. If it has to be held it should be hung in a clean, well-lit hall with good ventilation. Insects, rodents and birds must be kept out, dust must not blow in. Trays of offal should be on shelves, not on the floor. Barrows for wheeling carcasses and quarters are better than carrying on shoulders, as they can be cleaned frequently. All staff must wear clean clothing and observe strict personal hygiene. Transport of non-refrigerated meat is very hazardous. If meat is to be put in stockinettes and sacks these must be very clean. Meat should be on rails in the truck or wagon, and it is not advisable to carry it more than a day's journey before sale.

5 Must-Have Features in a Animal Drinker for sale

Guidelines for slaughtering, meat cutting and further processing

You can find more information on our web, so please take a look.

Check now