A Complete Guide to Gate Valves

Gate valves are a common linear valve type found in pipelines, both above and below ground. A gate valve is designed to start and stop the flow of liquid through ducting, allowing users to isolate a section of pipe when required. They are often called water gate valves or sluice valves.

When people ask what is a gate valve, they will often have follow-up requests for more information on what gate valves look like, what parts they include, the differences between various types, and exactly how they work. We will cover all of these areas in the various sections of this guide.

Gate valves usually consist of the valve body itself, which is installed in-line (through-conduit) on a length of pipe, and an attached handwheel actuator used for opening and closing the valve. This multi-turn wheel assembly most often extends above or to the side of the pipe and valve, attached to a bonnet assembly via a stem. It can be turned in one direction to open the valve, and in the opposite direction to close it.

The advantages of a gate valve are that they provide complete shut-off of any water flow for troubleshooting, maintenance and pipe-cleaning tasks. They are also bidirectional, meaning they can be used to block flow in both upstream and downstream directions, and they do not cause significant pressure loss in operation.

Limitations of gate valves in certain scenarios may include the fact that they are not especially quick to open or close. Additionally, they are not designed to throttle or control flow by being partially opened or shut.

This guide is designed to explain in more detail what gate valves are, what they are used for, how they work, and the different types of UK gate valves available to buy online. We will also briefly outline how to use them, as well as providing some clear and concise answers to common questions about gate valves. By the end of the guide, readers will be familiar with what sluice valves are, how they work, and why they are used.