Excavator E320 Track Chain Track Link: Fitment, Specifications, and Replacement Guide
To select an Excavator E320 track chain or track link, verify the machine’s exact model and serial number, then match the chain’s dimensions and configuration against the existing undercarriage or a confirmed parts specification. “E320” alone is not enough to establish fitment: machine generation, undercarriage configuration, and prior repairs can affect which assembly is required. Before ordering, confirm the chain pitch, link and bushing dimensions, link count, and track shoe connection details. At Zhonghai Jiuchuan, we use these details to help buyers clarify requirements and request a product quotation without relying on a model name alone.
Please visit our website for more information on this topic.
Key Takeaways
- Confirm the full machine identification and undercarriage configuration before selecting an E320 track chain.
- Compare measured dimensions in millimeters, link count, and shoe mounting details with the supplier’s specification.
- Decide whether you need a complete chain assembly or individual track links, and check compatibility with the remaining undercarriage components.
- Request written confirmation of fitment, included parts, minimum order quantity, and lead time before placing a purchase order.
Who This Guide Is For
This guide is for equipment owners, maintenance teams, dealers, and parts buyers sourcing a track chain or track link for an E320 excavator. It is useful whether you are replacing a worn chain, repairing damage to a section, or comparing suppliers for planned maintenance. The guidance focuses on fitment checks and procurement information rather than assigning a single specification to every E320 machine.
For a parts inquiry, gather the machine details and clear photographs before contacting a supplier. If the original assembly has already been modified or replaced, measurements and component identification are especially important. This helps reduce avoidable back-and-forth and gives the supplier a better basis for checking the requested configuration.
What an E320 Track Chain and Track Link Do
A track chain is the linked undercarriage assembly that travels around the excavator’s sprocket and idler. Track shoes attach to the chain and provide the ground-contact surface. Individual track links form the chain structure, while pins and bushings connect the links and create the joints that articulate as the machine moves.
Track chains are used across operating environments such as construction sites, earthmoving projects, and other applications where an excavator works on tracked undercarriage. Conditions such as abrasive ground, impact, operating practice, and maintenance can affect component wear. These conditions are reasons to inspect the complete undercarriage, not proof that one replacement material or configuration is suitable for every job.
Fitment and Specification Overview
There is no single dimension that confirms compatibility by itself. A chain may appear similar to the installed part while differing in pitch, link profile, pin or bushing dimensions, or connection details. Use the machine’s parts information, the existing assembly, and supplier confirmation together wherever possible.
Information to Confirm Before Ordering
| Data point | Unit or format | Why it matters |
|---|---|---|
| Track pitch, measured between corresponding pin centers | Millimeters (mm) | Helps identify the chain geometry and its relationship to the sprocket. |
| Pin or bushing dimensions, as applicable | Millimeters (mm) | Supports comparison with the installed chain and component specification. |
| Track shoe bolt or mounting details | Millimeters (mm) and hole pattern | Helps confirm that the intended shoes and fasteners can be matched to the chain. |
| Number of links and machine identification | Link count; model and serial number | Helps distinguish the required assembly and check order completeness. |
The table lists information to collect, not fixed E320 specifications. Do not treat an example dimension, an online listing, or a visual resemblance as confirmation of fit. Where direct measurement is difficult, share readable identification plates, part markings, and photographs with a parts specialist for review.
Chain Assembly or Individual Links
A complete chain assembly may be appropriate when the chain is broadly worn or when replacing it as a matched unit is part of the maintenance plan. An individual link or repair section may be considered when damage is localized and the remaining chain condition and compatibility have been assessed. The right scope depends on the machine, condition, repair method, and availability of matching components; it cannot be determined from the E320 name alone.
Zhonghai Jiuchuan supply professional and honest service.
How to Select and Replace the Track Chain
- Identify the machine. Record the full model designation, serial number, and any relevant undercarriage or configuration information. Check whether the machine’s current undercarriage matches its original parts documentation.
- Inspect the installed components. Note chain markings and visible wear or damage. Check related items, including sprockets, idlers, rollers, and track shoes, because compatibility and condition across the undercarriage can influence the repair decision.
- Collect measurements. Record pitch, relevant pin and bushing dimensions, link count, and shoe mounting details. Use suitable measuring tools and consistent reference points, and label each measurement clearly in millimeters.
- Define the order scope. Specify whether you are requesting a complete track chain, a link or repair section, or a chain with track shoes. List any required accessories separately rather than assuming they are included.
- Confirm the specification in writing. Send the information to the supplier and request confirmation of the offered configuration against your machine details. Resolve any differences between catalog information, measurements, and the supplier’s proposed part before approving the order.
- Plan installation and inspection. Follow the machine manufacturer’s service procedures and use qualified personnel and appropriate equipment. After installation, check chain engagement and related undercarriage components according to the applicable maintenance instructions.
Common Selection Mistakes
- Ordering by “E320” alone without confirming the machine’s specific identification and configuration.
- Using a worn component’s measurement as the only reference without checking other dimensions or available parts information.
- Assuming track shoes, bolts, or other hardware are included in a chain quotation.
- Replacing one component without assessing the condition and compatibility of the parts it engages with.
Material, Application, and Maintenance Considerations
Track chain components are commonly made from steel, but material descriptions alone do not establish suitability or service life. Buyers should ask what component is being quoted, how it is configured, and what product documentation is available. Avoid comparing suppliers only by a broad material label or an unsupported claim about durability.
Consider the actual operating environment and maintenance plan when discussing a replacement. Frequent impact, abrasive material, and demanding site conditions may make inspection and undercarriage condition particularly relevant, but they do not by themselves identify the correct chain specification. Ask the supplier to confirm fitment first, then evaluate product details and commercial terms against your requirements.
Pricing, MOQ, and Lead Time
Track chain pricing depends on the confirmed assembly, requested quantity, configuration, and delivery arrangements. Minimum order quantity and lead time can vary by product and order conditions, so they should be confirmed in the quotation rather than assumed from a general product page. For an accurate offer, provide the machine identification, required scope, destination, quantity, and any special documentation or packing needs.
Ask for a written quotation that identifies the product being offered and states what is included. Confirm the quoted quantity, packaging, payment terms, delivery basis, and expected dispatch or production schedule. If you are comparing offers, make sure each supplier is quoting the same chain configuration and scope.
Supplier Evaluation Checklist
A reliable sourcing process should make fitment and order scope clear before payment. Ask the supplier to explain which details were used to identify the part and whether the quotation is for a complete assembly or a specific component. Review the response for consistency with your machine information and measurements.
- Can the supplier review your model, serial number, measurements, and photographs?
- Does the quotation clearly describe the chain configuration and included components?
- Can the supplier provide available product drawings, dimensions, or identification details for your review?
- Are MOQ, lead time, packaging, and shipping arrangements stated clearly?
- Is there a clear process for resolving specification questions before production or shipment?
Get an E320 Track Chain Fitment Check
The safest way to source an Excavator E320 track chain or track link is to verify the exact machine, compare the relevant dimensions, define the order scope, and obtain written fitment confirmation. Do not rely on the model name or a visual match as the sole basis for purchase. These steps help you prepare a more complete inquiry and reduce the risk of ordering an assembly that does not match your undercarriage.
At Zhonghai Jiuchuan, we can review your machine details and requested configuration to support a parts inquiry for an E320 track chain or track link. Send the model and serial number, available measurements in millimeters, link count, photographs, quantity, and destination. We can then confirm the information needed to discuss product availability, quotation, MOQ, and lead time.