To verify the right Nissan oil seal, check the part number first, confirm it against the vehicle’s exact year, model, engine or transmission, and then compare the seal’s dimensions and design. Do not rely on a model name or a visual match alone: the same vehicle line may use different seals across production versions or applications. If the original number is unavailable, use the vehicle details and carefully measured seal specifications together, then confirm the match with a supplier before ordering.
If you want to learn more, please visit our website.
This guide explains a practical fitment process for maintenance teams, parts distributors, workshops, and procurement buyers. It also covers common identification mistakes, material considerations, purchasing factors, and the information to send TEBIETE when requesting Nissan oil seal sourcing support.
This guide is for anyone who needs to identify or source a replacement oil seal for a Nissan vehicle or component. It is useful when the original seal is worn, its markings are difficult to read, or a catalog search returns several possible matches. Buyers handling replacement parts in volume can also use the checklist to reduce ambiguity before requesting a quotation.
Fitment verification is especially important when a vehicle’s market, production year, engine, or transmission is not fully known. Keep in mind that this page is a selection framework, not a Nissan parts catalog. Confirm any final application-specific part number through reliable vehicle or component information and supplier review.
An oil seal is fitted around a rotating shaft or between components to help retain lubricant and limit the entry of dirt or other contaminants. Depending on its location and design, it may seal an engine, transmission, axle, hub, or another assembly. The required seal is determined by the shaft, housing, operating conditions, and sealing arrangement—not simply by the vehicle badge.
Oil seals can differ in their inner and outer diameters, width, lip configuration, case construction, and material. Two seals may look alike but differ in a dimension or feature that affects installation and operation. For this reason, compare both the part identity and the physical specification.
Inspect the old seal and any packaging, service records, or parts documentation for a readable part number. Record the full number exactly as shown, including letters, digits, and any suffix; do not assume that a similar-looking number is interchangeable. If the number is partially worn or uncertain, take a clear photograph and record the location from which the seal was removed.
Use the number as a starting point rather than the only check. A catalog or supplier lookup should be matched to the specific vehicle or assembly, and any superseded or alternative number should be confirmed before purchase. If you cannot establish what the number refers to, do not treat a search result as proof of fitment.
Gather the vehicle identification details available to you: model, model year, market or region, engine, and transmission where relevant. A VIN or chassis number may help a parts professional identify the correct configuration, but access to compatible catalog information may be required. Also specify the seal’s position, such as front or rear, and the component it serves.
When the seal is for a standalone assembly or replacement component, provide its make, model, and identifying numbers instead of relying only on the vehicle description. A vehicle may have variations associated with its production period or powertrain. The more precisely you identify the application, the easier it is to rule out close but unsuitable alternatives.
If the original seal is available, measure its inner diameter, outer diameter, and width. Record all three dimensions in millimeters and note whether the seal is damaged, distorted, or difficult to measure accurately. A caliper can help with measurement, but do not force the tool against a flexible lip or treat a worn seal’s dimensions as definitive.
For example, 30 × 52 × 8 mm can be used to describe an illustrative seal with a 30 mm inner diameter, 52 mm outer diameter, and 8 mm width. This is a format example only, not a Nissan part number or a confirmed Nissan application. Compare measurements with a verified specification where possible, because wear, deformation, and measurement technique can affect readings.
TEBIETE Product Page
Also record visible features: the number and orientation of sealing lips, a garter spring if present, metal or rubber-covered outer construction, and any dust lip or special profile. Photograph the seal from the side and front, and include a scale or measurement record where practical. A dimensional match alone may not confirm the correct construction.
Seal material should be selected for the lubricant, temperature, shaft speed, and surrounding environment specified for the application. NBR and FKM are examples of materials used in oil-sealing applications, but neither should be treated as a universal replacement for the other. Actual suitability depends on the compound formulation, seal design, and service conditions.
When the original material is unknown, share the fluid type and operating conditions with the supplier rather than guessing based on color or appearance. A material substitution should be confirmed as suitable for the actual application. Avoid fitting a seal solely because its dimensions appear correct.
| Check | Information to provide | Why it matters |
|---|---|---|
| Part identity | Full part number, including suffixes, or a clear photograph | Supports catalog or supplier cross-checking |
| Vehicle or assembly | Model, year, market, engine or transmission, and seal position | Distinguishes application variations |
| Dimensions | Inner diameter, outer diameter, and width in millimeters | Helps compare the physical specification |
| Construction and use | Lip profile, case type, lubricant, and known service conditions | Informs design and material review |
Before placing an order, ask the supplier to state which information they used to confirm the proposed item. Request clarification if the match is based only on a broad vehicle description or only on dimensions. For repeat purchases, save the confirmed part number, application details, dimensions, and any agreed specification together.
These checks are particularly useful when an order is urgent or when several candidate part numbers appear in a search. A short pause to confirm the application can help prevent avoidable returns, installation delays, and repeat purchasing work. If details conflict—for example, the dimensions differ from a catalog result—resolve the discrepancy before ordering.
Price and availability depend on the identified specification, order quantity, sourcing route, and any required customization. A request based on an incomplete vehicle description may need clarification before a supplier can provide a meaningful quotation. Ask whether the quoted item is a direct part-number match, a cross-reference, or a dimension-based proposal.
For procurement planning, request the minimum order quantity, quoted lead time, packaging details, and the basis of fitment confirmation. If you need multiple seal types, list each application separately instead of combining them under a general “Nissan oil seal” description. This makes it easier to compare supplier responses on equivalent terms.
Choose a supplier that is willing to review the application details and identify any information still needed for confirmation. Check that the quotation describes the proposed part clearly, including the available part number or dimensions and any stated material or construction details. If the supplier cannot verify a fitment conclusively, ask what additional information—such as a component number, drawing, or clearer photograph—would help.
TEBIETE supports B2B buyers seeking oil seal sourcing and fitment review. Send the Nissan part number if available, the vehicle or assembly information, the seal location, and the three measured dimensions in millimeters. Include photographs and service-condition details when the number is missing or the application requires a material review.
The most reliable Nissan oil seal identification uses three checks together: part number, exact vehicle or component details, and physical dimensions and design. Treat a vehicle model or a dimensional match as a clue rather than final proof, and confirm material suitability for the intended service conditions. If any information disagrees, resolve it with catalog evidence or supplier review before purchase.
To move forward, collect the part number, vehicle or assembly identifiers, seal position, inner diameter, outer diameter, width, and clear photographs. Send these details to TEBIETE to request a sourcing review and quotation, noting any uncertain information openly. This gives both sides a clearer basis for confirming the requested Nissan oil seal and discussing quantity and lead time.
Contact us to discuss your requirements of Nissan Oil Seal. Our experienced sales team can help you identify the options that best suit your needs.