What are the maintenance points for rubber conveyor belts?
1. The rubber conveyor belt should be kept away from sunlight, rain and snow during storage and transportation, and should be kept clean. It should not be in contact with substances containing oil, acid, alkali and organic solvents, and the distance between it and the heating device should be more than 1 meter.
2. During storage, the warehouse temperature should be kept between -18-40 degrees, and the relative humidity should be kept between 50-80.
3. During the storage period, the product should be placed in a roll without bending. During the storage period, it should be turned over every quarter.
4. Conveyor belts of different types and specifications are not suitable for interconnection, and the joints should be glued together.
5. The type, structure and number of layers of the conveyor belt should be selected reasonably according to the conditions of use.
6. The running speed of the conveyor belt should not exceed 2.5 m/s. For agglomerated and worn materials, a fixed-force type discharge device should be used, and the speed should be reduced as much as possible.
7. The relationship between the diameter of the conveyor belt driving roller and the conveyor belt cloth layer, the combination of the driving roller and the reverse roller, and the requirements of the bracket angle should be selected reasonably according to the conditions of use. Conveyor design requirements.
8. The paper feeding direction should match the running direction of the tape. In order to reduce the impact of the material on the belt when the material falls, a chute should be used to reduce the distance the material falls. The belt receiving part should shorten the distance between the rollers, and use buffer rollers to prevent leakage. The material and belt side should use soft and moderate baffle to prevent the baffle from being too hard and scratching the surface of the belt. conveyor.
9. When using the conveyor belt, pay attention to the following: Avoid the rollers being covered by materials and cause rotation failure, avoid the material leakage between the card, the roller and the belt, pay attention to the lubrication of the moving parts, but do not apply grease to the conveyor belt. Avoid heavy starting; If tape deviation occurs, corrective measures should be taken in time; Partial damage of the tape should be repaired in time to avoid expansion. Prevent the adhesive tape from sticking to the frame, pillar or block material, and prevent it from breaking.