What is Difference Between V-port Ball Valves and Globe Control Valves?

In the automation, it will use a v-port ball valve or globe type control valve to regulate the process pressure, temperature, or flow rate, but how to know where should be used v-port ball valve, or globe control valve is important for engineer’s selection.
So understanding the differences between v-port ball valves and globe control valves is our major topic.

Figure 1: V-Port Ball Valve (rotary) vs. Globe Contro Valve (linear).

Both v-port ball valve and globe control valve are consist of three main parts: valve body, actuator, and positioner. You can refer to figure 1 to see each part.
When we selecting a particular condition of control valves, commonly we will consider V-port ball valves and globe-type control valves. The following are the points to differentiate them.

1. Action type

V-port ball valves use rotary motion so the installation space is more compact than globe-type control valves, which use linear motion.

2. Flow coefficient Cv

Compared to the globe control valve of the same size, the v-port ball valve has higher flow coefficients Cv.
It means that a smaller V-ball control valve can be used to achieve the same flow capacity as a comparable globe control valve. But due to the flow curve of the v-port ball valve is not ideal, it’s not an uneven increase of flow when compared to the degree of rotary. So for high precise flow control, we still prefer to use globe-type control valves.

flow coefficient cv control valvesflow coefficient cv1

3. Budget

According to point 1. 2, we know that v-port ball valves are lower budget than globe control valves, with small size and compact installation space. Typically, a V-Port Ball Valve will be 35% to 50% less than a Globe Valve.

4. Shutoff Tightness

The v-port ball valve uses a floating ball to close the valve with a rotary motion, which provides a tight shut-off with zero leakage and regulates flow function. When the valve is closed, upstream pressure pushes the ball against the downstream seat, thus enhancing the seal. But for globe-type control valves, it’s hard to achieve zero leakage, which usually complies with ANSI FCI 70-2 Class II, III, IV, V, VI.

5.  Closure Component Design

60-degree ball valve

V-port ball valves are specialized ball valves with different V segment options in the ball part, 30°, 60°, and 90°. The 30° segment makes a better-tapered control throughout the valve rotary, and 60° and 90° offers a larger Cv than 30°.

15 degree v port ball valve1 30 degree v port ball valve1 60 degree v port ball valve1

Globe Valves vs. V-Port Ball Valves

ItemGlobe Type Control ValveV-Port Ball ValveFunction2-Way Flow Control Valve
3-Way Mixing Type Control Valve
3-Way Diverting Type Control Valve2-Way Flow Control ValveShutoff TightnessNot Zero LeakagePositive Shutoff, Zero LeakageControl AccuracyExcellenceCoarseHigh Response CycleYes, Constant ControlNoFlow CapacityLowerHigherCavitation PreventionPriority Selection–High TemperaturePriority Selection–Easy MaintenancePriority Selection–Cost– More Economical Solution

ASK FOR A QUOTE

THINKTANK is a well-known brand which focuses on control valves for over 10 years, we provide OEM service for 42 international valve and instrument brands.