The plastics pipes industry revolves around specifications and standards for the products and test methods to verify performance. Pipe systems are one of the most critical applications for thermoplastics materials with a design base of 50 years and expected lifetime in excess of 100 years. Products must be fit for purpose and the end user needs confidence in the product in order to specify them. Specifications and dimensions must be universal and methods of test need to be standardised. The industry has put in a great deal of effort over many years to develop reliable methods.
Product and test method standards are developed by CEN for Europe and ISO for global use. ISO/TC 138 and CEN/TC 155 Technical Committees are responsible for ISO and EN standards for plastics piping systems respectively. The TCs are split into Sub-committees and Working Groups for specific applications and test methods. It takes several years to develop a standard to publication and these are reviewed every 3 to 5 years and revised if required.
ISO 4427-1
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 1: General
ISO 4427-2
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 2: Pipes
ISO 4427-3
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 3: Fittings
ISO 4427-5
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 5: Fitness for purpose of the system
ISO 4437-1
Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 1: General
ISO 4437-2
Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 2: Pipes
ISO 4437-3
Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 3: Fittings
ISO 4437-4
Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 4: Valves
ISO 4437-5
Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 5: Fitness for purpose of the system
EN 1555-1
Plastics piping systems for the supply of gaseous fuels –Polyethylene (PE) – Part 1: General
EN 1555-2
Plastics piping systems for the supply of gaseous fuels –Polyethylene (PE) – Part 2: Pipes
EN 1555-3
Plastics piping systems for the supply of gaseous fuels –Polyethylene (PE) – Part 3: Fittings
EN 1555-4
Plastics piping systems for the supply of gaseous fuels –Polyethylene (PE) – Part 4: Valves
EN 1555-5
Plastics piping systems for the supply of gaseous fuels –Polyethylene (PE) – Part 5: Fitness for purpose of the system
CEN/TS 1555-7
Plastics piping systems for the supply of gaseous fuels –Polyethylene (PE) – Part 7: Guidance for assessment of conformity
EN 12201-1
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 1: General
EN 12201-2
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 2: Pipes
EN 12201-3
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 3: Fittings
EN 12201-4
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 4: Valves
EN 12201-5
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 5: Fitness for purpose of the system
CEN/TS 12201-7
Plastics piping systems for water supply, and for drainage and sewerage under pressure – Polyethylene (PE) – Part 7: Guidance for assessment of conformity
ISO 9623
PE/metal and PP/metal adapter fittings for pipes for fluids under pressure – Design lengths and size of threads – Metric series
ISO 9624
Thermoplastics piping systems for fluids under pressure – Flange adapters and loose backing flanges – Mating dimensions
ISO 15494
Plastics piping systems for industrial applications – Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) – Metric series for specifications for components and the system
ISO 17885
Plastics piping systems – Mechanical fittings for pressure piping systems – Specifications
ISO 12176-1
Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems – Part 1: Butt fusion
ISO 12176-2
Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems – Part 2: Electrofusion
ISO 12176-3
Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems – Part 3: Operator's badge
ISO 12176-4
Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems – Part 4: Traceability coding
ISO 13761
Plastics pipes and fittings – Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20°C
ISO 13950
Plastics pipes and fittings – Automatic recognition systems for electrofusion joints
ISO 21307
Plastics pipes and fittings – Butt fusion jointing procedures for polyethylene (PE) piping systems
ISO/TS 10839
Polyethylene pipes and fittings for the supply of gaseous fuels – Code of practice for design, handling and installation
EN 12007-2
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar – Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
ISO 1133-1
Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics – Part 1: Standard method
ISO 1167-1
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure – Part 1: General method
ISO 1167-2
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure – Part 2: Preparation of pipe test pieces
ISO 1167-3
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure – Part 3: Preparation of components
ISO 1167-4
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids – Determination of the resistance to internal pressure – Part 4: Preparation of assemblies
ISO 1183-1
Plastics – Methods for determining the density of non-cellular plastics – Part 1: Immersion method, liquid pyknometer method and titration method
ISO 1183-2
Plastics – Methods for determining the density of non-cellular plastics – Part 2: Density gradient column method
ISO 2505
Thermoplastics pipes – Longitudinal reversion – Test method and parameters
ISO 3126
Plastics piping systems – Plastics components – Determination of dimensions
ISO 4433-1
Thermoplastics pipes – Resistance to liquid chemicals – Classification – Part 1: Immersion test method
ISO 4433-2
Thermoplastics pipes – Resistance to liquid chemicals – Classification – Part 2: Polyolefin pipes
ISO 6259-1
Thermoplastics pipes – Determination of tensile properties – Part 1: General test method
ISO 6259-3
Thermoplastics pipes – Determination of tensile properties – Part 3: Polyolefin pipes
ISO 6964
Polyolefin pipes and fittings – Determination of carbon black content by calcination and pyrolysis – Test method
ISO 9080
Plastics piping and ducting systems – Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9969
Thermoplastics pipes – Determination of ring stiffness
ISO 11357-6
Plastics – Differential scanning calorimetry (DSC) – Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11413
Plastics pipes and fittings – Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
ISO 11414
Plastics pipes and fittings – Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
ISO 12162
Thermoplastics materials for pipes and fittings for pressure applications – Classification, designation and design coefficient
ISO 13477
Thermoplastics pipes for the conveyance of fluids – Determination of resistance to rapid crack propagation (RCP) – Small-scale steady-state test (S4 test)
ISO 13478
Thermoplastics pipes for the conveyance of fluids – Determination of resistance to rapid crack propagation (RCP) – Full-scale test (FST)
ISO 13479
Polyolefin pipes for the conveyance of fluids – Determination of resistance to crack propagation – Test method for slow crack growth on notched pipes
ISO 13480
Polyethylene pipes – Resistance to slow crack growth – Cone test method
ISO 13951
Plastics piping systems – Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
ISO 13953
Polyethylene (PE) pipes and fittings – Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO 13954
Plastics pipes and fittings – Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955
Plastics pipes and fittings – Crushing decohesion test for polyethylene (PE) electrofusion assemblies
ISO 13956
Plastics pipes and fittings – Decohesion test of polyethylene (PE) saddle fusion joints – Evaluation of ductility of fusion joint interface by tear test
ISO 13957
Plastics pipes and fittings – Polyethylene (PE) tapping tees – Test method for impact resistance
ISO 13968
Plastics piping and ducting systems – Thermoplastics pipes – Determination of ring flexibility
ISO 15512
Plastics – Determination of water content
ISO 16871
Plastics piping and ducting systems – Plastics pipes and fittings – Method for exposure to direct (natural) weathering
ISO 17778
Plastics piping systems – Fittings, valves and ancillaries – Determination of gaseous flow rate/pressure drop relationships
ISO 18553
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
ISO 21751
Plastics pipes and fittings – Decohesion test of electrofusion assemblies – Strip-bend test
EN 12099
Plastics piping systems – Polyethylene piping materials and components – Determination of volatile content
EN 12106
Plastics piping systems – Polyethylene (PE) pipes – Test method for the resistance to internal pressure after application of squeeze-off
ISO 3
Preferred numbers – Series of preferred numbers
ISO 472
Plastics – Vocabulary
ISO 1043-1
Plastics – Symbols and abbreviated terms – Part 1: Basic polymers and their special characteristics
ISO 4065
Thermoplastics pipes – Universal wall thickness table
ISO 11922-1
Thermoplastics pipes for the conveyance of fluids – Dimensions and tolerances – Part 1: Metric series
ISO 14040
Environmental management – Life cycle assessment – Principles and framework
ISO/TR 10358
Plastics pipes and fittings – Combined chemical resistance classification table
Related keywords : pe pipe specification, hdpe standards, hdpe pipe fittings standard, poly pipe specs, hdpe water pipe specifications, hdpe pipe and fittings specifications, hdpe pipe specification, hdpe fitting dimensions, iso 472, en pipe standards, hdpe pipeline, hdpe pipe standard, iso 15494, standard pipes, iso pipe standards, polyethylene pipe specifications, hdpe pipe standards, hdpe pipe is code
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of hdpe pipe price list.